{{ 'fb_in_app_browser_popup.desc' | translate }} {{ 'fb_in_app_browser_popup.copy_link' | translate }}
{{ 'in_app_browser_popup.desc' | translate }}
{{ childProduct.title_translations | translateModel }}
{{ getChildVariationShorthand(childProduct.child_variation) }}
{{ getSelectedItemDetail(selectedChildProduct, item).childProductName }} x {{ selectedChildProduct.quantity || 1 }}
{{ getSelectedItemDetail(selectedChildProduct, item).childVariationName }}
SOLD OUT
Not enough stock. Please adjust your quantity.
{{'products.quick_cart.out_of_number_hint'| translate}}
{{'product.preorder_limit.hint'| translate}}
Limit -1 per order.
{{'products.quick_cart.quantity_of_stock_hint'| translate : {message: quantityOfStock} }}
版本區別:新版大小跟舊版本完全一樣,其中
1.加粗了走線,可以通過更大的電流。
2.支持ESP-01(舊版本不支持)
3.加入了光耦,大大提高了模塊性能
4.低電平控制(舊版本高電平控制)
5.寬電壓輸入,支持DC 5-12V(舊版本值支持5V)
*模塊工作電壓:DC 5V-12V
*繼電器負載能力:10A 250VAC 10A 125VAC 10A 30VDC 10A 28VDC
1. Description
This ESP-01/01S Relay based on AI-Thinker ESP-01/01S WIFI module. It is designed for smart home, Internet of thing and others DIY project. With this smart relay, you will easy to DIY your smart switch to control any device by your phone anywhere. We support the APP and LUA source code.
In the version, we use the GPIO0 of ESP-01 OR ESP-01S to control the Relay by Low level.
2. Parameter
*Working voltage: DC5V-12V
*Working current: ≥250mA
*Communication: ESP-01 or ESP-01S WIFI module
*Transmission distance: the maximum transmission distance of 400m (open environment, mobile phone equipped with WIFI module)
*Load: 10A/250VAC 10A/30VDC, the relay pulls 100,000 times
*GPIO0 of ESP-01/01S Control the Relay (Low level active)
*Product size: 37 * 25mm
3. Usage
1) Hardware connection
Just plug the ESP-01/01S to the 2*4 pin header after download the code to ESP-01/01S. Show as below:
2) Power supply
Connect a DC 5V-12V power to the GND and VCC.
3) Open your phone WLAN then connect the WiFi ESP8266-XXXX, Power word
4) Open the ESP8266 Controller.app ( Installed it in your android phone before)